https://airwood.ca/blogs/faqs.atomAirwood Flooring Accessories - FAQs2011-03-09T08:34:59-05:00Airwood Flooring Accessorieshttps://airwood.ca/blogs/faqs/2819832-what-currency-do-you-accept2011-03-09T08:34:59-05:002011-05-26T13:09:11-04:00What currency do you acceptMike Mooser
All credit card charges will be processed in US dollars.
]]>
https://airwood.ca/blogs/faqs/2631362-how-long-does-it-take-to-receive-the-vents2011-01-30T16:41:00-05:002015-12-16T07:08:49-05:00How long does it take to receive the vents?Jeff Mulder
We can ship most standard unfinished floor vents in about 7-10 business days. Exotic species, Egg Crate, Baseboard, Cold Air returns and pre finishing take approximately 3-4 weeks to manufacture.]]>
https://airwood.ca/blogs/faqs/2631062-how-do-i-know-what-size-i-need2011-01-30T15:30:56-05:002011-01-30T17:29:21-05:00How do I know what size I need?Jeff Mulder
Measure twice. Order once!
Measure the opening in your floor, wall or ceiling. The width and length of your opening should match the duct opening sizes.
]]>
https://airwood.ca/blogs/faqs/2631042-what-colors-do-you-offer2011-01-30T15:30:17-05:002013-03-19T23:12:29-04:00What colors do you offer?Mike Mooser
At the current time we can ship unfinished or prefinished with a natural finish. Both semi, and low gloss finish options are available.
]]>
https://airwood.ca/blogs/faqs/2631032-what-species-of-wood-do-you-offer2011-01-30T15:29:51-05:002013-09-26T08:31:33-04:00What species of wood do you offer?Jeff Mulder
Our vents are manufactured in Red Oak, White Oak, 1/4 Sawn White Oak, Maple, Beech, Birch, Ash, Hickory, Fir, Cherry, Walnut, Brazilian Cherry, Brazilian Mahogany, and Brazilian Walnut, other species may be available please call to inquire.]]>
https://airwood.ca/blogs/faqs/2631012-what-is-a-self-rimming-vent2011-01-30T15:29:29-05:002011-01-30T17:31:26-05:00What is a self-rimming vent?Jeff Mulder
A self-rimming vent is one that sits on the surface of an installed floor. It rims the floor much like the metal vents.
]]>
https://airwood.ca/blogs/faqs/2631002-what-is-a-flush-mount-vent2011-01-30T15:29:04-05:002011-01-30T17:31:48-05:00What is a flush-mount vent?Jeff Mulder
A flush-mount vent sits flush with 3/4" hardwood floor. It is strongly recommended that this vent be installed with the hardwood floor.
]]>
https://airwood.ca/blogs/faqs/2630992-what-is-a-cold-air-return2011-01-30T15:28:41-05:002011-01-30T17:32:12-05:00What is a cold-air return?Jeff Mulder
A cold-air return is a vent that is usually much larger than a standard heating vent. These are usually wall-mounted and are positioned in line with the baseboard.
]]>
https://airwood.ca/blogs/faqs/2630982-how-do-i-finish-an-unfinished-register2011-01-30T15:28:03-05:002011-01-30T17:32:43-05:00How do I finish an unfinished register?Jeff Mulder
Sand all surfaces lightly with fine grit sandpaper. Do not use steel wool as it tends to shed fibres that stick to the grain and ruin a smooth finish. Stain all surfaces of the register: top, ends and louvers to the desired colour. No need to finish the back of the vent as it is sealed at the factory.
1. Allow to dry thoroughly.
2. Apply three coats of desired finish to all surfaces with a light sanding in between.
3. Allow to dry thoroughly
]]>
https://airwood.ca/blogs/faqs/2630962-do-i-really-need-an-air-flow-damper2011-01-30T15:27:20-05:002011-01-30T17:33:03-05:00Do I really need an air flow damper?Jeff Mulder
Some areas require an air flow regulator, this is why all of our standard warm air vents come with one.
]]>
https://airwood.ca/blogs/faqs/2473462-can-these-register-be-walked-on2010-12-27T13:09:52-05:002011-01-30T17:33:23-05:00Can these register be walked on?Shopify
It is not recommended that you use wooden floor vents in high traffic areas.
]]>